
Roof Replacement Built Around the Entire Roofing System
A new roof is one of the biggest investments you'll make in a property. DryInside treats it that way: correcting what's under the surface, not just what's on top, and walking you through every decision along the way.
When Replacement Makes Sense
- Leaks in several places, or leaks that return after repairs
- Shingles curling, cupping, cracking or losing granules across the roof
- Widespread hail or wind damage
- Soft or sagging areas that suggest deck deterioration
- Repeated ice dams caused by missing eave protection or poor ventilation
- Metal roofs with widespread fastener, seam or coating failure
- Repair bills that keep adding up on a roof near the end of its life
Repeated Repairs, Material Deterioration and Storm Scope
Most replacement decisions come from one of three situations.
| Situation | What it looks like | Why replacement may fit |
|---|---|---|
| Repeated repairs | New leaks in different spots each year | The system is failing faster than it can be patched; see roof repair |
| Material deterioration | Curling, cracking, brittle or granule-worn shingles across slopes; rusted or failing metal | Spot repairs don't hold when surrounding material can't be worked |
| Storm scope | Hail or wind damage on many slopes, or material that can't be matched | Damage is widespread rather than isolated; see hail damage |
Repair vs. Replacement
If the damage is localized and the rest of the roof is sound, roof repair is usually the right call. If problems are system-wide, replacement stops the cycle.
Homeowners can read more about the full residential roofing process; building owners should see commercial roofing for replacement planning around operations.
The honest answer comes from an inspection. DryInside will show you photos of what we find and explain why we're recommending one path over the other. You make the decision.
What a Complete Replacement Includes
The visible roofing is only one layer. A durable replacement addresses every part of the system.
| Component | What DryInside looks at |
|---|---|
| Roof surface | Material choice suited to the roof pitch, climate, appearance and budget |
| Underlayment | Synthetic underlayment across the deck; ice & water membrane at eaves, valleys and penetrations where appropriate |
| Flashing | New step, headwall, chimney and valley flashing rather than reusing tired metal |
| Ventilation | Balanced intake and exhaust to manage attic heat and moisture, see roof ventilation |
| Deck condition | Inspected once the old roof is removed; damaged sheathing is identified and discussed with you |
| Penetrations | New pipe boots, vent flashing and properly detailed skylights |
| Drainage | Drip edge, valleys and how the roof hands water off to gutters |
Choosing a Material
The right roof depends on the house, the region and what you value most. DryInside Roofing and Exteriors works with established manufacturers across shingle, metal, tile and specialty systems, then helps you compare the products that fit the roof rather than forcing one brand onto every project.
- Asphalt shingles, versatile, cost-effective and easy to repair
- Metal roofing, strong choice for snow country and high-desert sun; standing seam and exposed-fastener options
- Stone-coated steel, metal performance with a textured look
- Tile: distinctive, heavy, requires structural consideration
- Wood shake, natural appearance with higher maintenance
- Flat & low-slope, membrane systems for low-pitch areas
What Affects Roof Replacement Cost
DryInside doesn't publish one-size-fits-all prices, because no two roofs are the same. These are the variables that move the number.
- Roof size and the number of slopes, valleys and hips
- Pitch: steeper roofs take more time and safety equipment
- How many existing layers must be torn off
- Material and profile selected
- Deck repairs discovered after tear-off
- Number of penetrations, skylights and chimneys
- Ventilation corrections
- Access, height and site conditions
You'll get a written scope and price after an inspection. Financing is available for qualifying projects.
The Installation Process
Here's what to expect from start to finish.
- 1. Inspection, measurements and written recommendation
- 2. Material and color selection
- 3. Scheduling around weather
- Site protection: tarps, landscaping and siding protection, dumpster placement
- 5. Tear-off and deck inspection
- 6. Underlayment, ice barrier, flashing and ventilation
- 7. New roofing installation
- 8. Cleanup, magnetic nail sweep and final review with you
Preparing Your Property
A little preparation makes install days smoother.
- Move vehicles out of the driveway and garage area
- Take down fragile wall hangings: vibration travels through framing
- Cover belongings in the attic if it's used for storage
- Let neighbors know about noise and the dumpster
- Keep pets and kids clear of the work area
Cleanup and Final Review
The job isn't done when the last shingle goes down. DryInside cleans debris from the property, runs magnetic sweeps for nails, and walks the finished work with you so you can ask questions and see the details.
Questions to Ask Any Roofing Contractor
Whoever you hire, these questions separate careful contractors from rushed ones.
- Are you licensed in this state? (DryInside: Oregon CCB #258265; licensed in Utah and Idaho)
- Will you replace flashing, or reuse the old metal?
- How will you handle damaged decking, and how is it priced?
- What ventilation changes, if any, does this roof need?
- What underlayment and ice barrier will you use, and where?
- Who is my point of contact during the project?
- How do you protect the property and clean up?
- What manufacturer and workmanship warranty terms apply, in writing?
In Salt Lake City & the Wasatch Front
Heat, hail and snow all shape replacements along the Wasatch Front. See roof replacement in Salt Lake City.
In Bend & Central Oregon
Snow shedding, ventilation and material choice shape replacements in Central Oregon. See how we plan replacements in Bend.
Roof Replacement Near You
Replacement projects are handled from DryInside's three offices.
Bend Roof Replacement
Central Oregon roofs handle heavy snow loads, ice at the eaves, high-elevation sun and big day-to-night temperature swings. Roof replacement from the DryInside Bend office on NW Clearwater Drive.
Learn moreSalt Lake City Roof Replacement
Wasatch Front roofs deal with canyon wind, spring hail, lake-effect snow and hot, dry summers. Roof replacement from the DryInside Farmington office on E 400 S.
Learn moreMoab Roof Replacement
Intense UV, desert heat, wind-driven sand and monsoon storms age roofs differently in southeastern Utah. Served from our Farmington office.
Learn moreRecent DryInside Roofing Work
View Gallery


Frequently Asked Questions
How long does a roof replacement take?
Many residential roofs take one to a few days of installation, depending on size, complexity, material, deck repairs and weather. You'll get a timeline with your proposal.
Can you install a new roof over the old one?
Sometimes codes allow it, but DryInside generally recommends tear-off so the deck can be inspected and flashing and underlayment replaced properly.
How much does a new roof cost?
It depends on size, pitch, layers, material, deck repairs, penetrations and access. DryInside quotes from an inspection rather than publishing a generic price.
Will you replace damaged decking?
Damaged sheathing is identified once the old roof is off. We'll show you and explain the cost before proceeding.
Can insurance pay for my roof replacement?
If damage was caused by a covered event such as hail or wind, it may. Coverage depends on your policy. DryInside documents conditions to support your conversation with the insurer. See storm damage.
Which material lasts longest?
Service life depends on the material, installation, ventilation, climate and maintenance. We'll explain tradeoffs for your roof rather than promising a number.
Not Sure What Your Roof Needs?
Schedule a free roof inspection. We'll document what we find and explain your options clearly.
DryInside Roofing and Exteriors is a family-owned residential & commercial roofing contractor licensed in Oregon, Utah and Idaho.
