
Commercial Roofing for Properties That Can't Afford Surprises
A commercial roof leak isn't just a repair. It's tenants, inventory, operations and budgets. DryInside inspects, troubleshoots, repairs and plans replacements for commercial roofs, with documentation owners and property managers can actually use.
Commercial Roof Inspections
See how our roof inspections work, or request a free inspection.
- Membrane surface, seams and laps
- Ponding water and drainage: drains, scuppers, gutters
- Parapets, copings and wall flashing
- Rooftop equipment curbs and penetrations
- Metal panels, fasteners, seams and trim
- Storm impacts and wind-lifted areas
Leak Troubleshooting
On low-slope roofs, water can travel a long way under the membrane or along the deck before it drips inside. Finding the source takes methodical work.
DryInside checks seams, penetrations, curbs, drains and parapet flashing upslope of the interior evidence, and documents what we find so you can share it with owners, tenants or insurers.
Where Commercial Roofs Leak
Most commercial leaks start at a detail, not in the open field of the membrane.
| Location | Typical problem | What helps |
|---|---|---|
| Penetrations and curbs | Split boots, failed sealant, open corners at HVAC curbs | Re-flash to the membrane rather than surface sealant |
| Drains and scuppers | Clogs, failed clamping rings, ponding around the outlet | Clear, repair and check slope to drain |
| Seams and laps | Open or poorly welded seams, often near ponding | Seam repair and drainage review |
| Parapets and copings | Loose coping, open joints, wall flashing separation | Reset coping and flashing |
| Metal roofs | Backed-out fasteners, worn washers, trim movement | Fastener and trim service; see metal roofing |
Commercial Roof Repair
Targeted repairs (seams, flashings, curbs, punctures, drains and metal details) often extend a roof's service life at a fraction of replacement cost.
We'll be clear about whether a repair buys meaningful time or just postpones a bigger problem. For residential-scale repair details, see roof repair.
Replacement Planning
Commercial roof replacement is a capital decision. DryInside helps you plan it instead of reacting to it.
- Condition documentation to support budgeting and phasing
- System options suited to the building, slope and use
- Drainage and insulation considerations
- Scheduling that works around operations and tenants
- Clear scope so bids can be compared fairly
Low-Slope and Flat Roofing
Flat and low-slope roofs depend on drainage and seams. Ponding water, UV exposure and foot traffic around equipment are the most common sources of wear.
Metal Commercial Roofing
Metal roofing is common on warehouses, shops, agricultural and mixed-use buildings. Fastener and washer failure, seam issues and thermal movement at trim are typical repair needs.
Storm Damage on Commercial Roofs
Hail can puncture or bruise membranes and dent metal; wind can lift perimeter edges and flashing. A documented storm damage inspection helps with insurance and repair decisions. See also hail damage.
Documentation for Owners and Managers
You'll get dated photos, a written summary of conditions and prioritized recommendations, useful for board meetings, capital planning and insurance conversations.
Minimizing Disruption
Commercial buildings stay in use during roofing work. DryInside plans around that.
- Coordination of access, staging and parking
- Scheduling around business hours where needed
- Protection of entrances, walkways and HVAC intakes
- Clear communication with on-site contacts
- Daily cleanup
Property Management Considerations
For managers handling multiple buildings, consistency matters: a single point of contact, predictable documentation and honest prioritization of what needs attention this year versus next.
Own a home as well? See residential roofing.
In Salt Lake City & the Wasatch Front
Documented inspections and storm records for Utah commercial properties. See commercial roofing in Salt Lake City.
In Bend & Central Oregon
Low-slope roofs under Central Oregon snow need clear drainage and planned replacements. See commercial roofing in Bend.
Commercial Roofing Near You
Commercial work is handled from DryInside's Salt Lake City and Bend offices.
Salt Lake City Commercial Roofing
Wasatch Front roofs deal with canyon wind, spring hail, lake-effect snow and hot, dry summers. Commercial roofing from the DryInside Farmington office on E 400 S.
Learn moreBend Commercial Roofing
Central Oregon roofs handle heavy snow loads, ice at the eaves, high-elevation sun and big day-to-night temperature swings. Commercial roofing from the DryInside Bend office on NW Clearwater Drive.
Learn moreMoab Commercial Roofing
Intense UV, desert heat, wind-driven sand and monsoon storms age roofs differently in southeastern Utah. Served from our Farmington office.
Learn moreRecent DryInside Roofing Work
View Gallery


Frequently Asked Questions
What types of commercial roofs does DryInside work on?
Low-slope and flat membrane roofs and metal roofs, including inspections, repairs and replacement planning.
Can you work while our building stays open?
Yes. We plan staging, access and scheduling to limit disruption to occupants and operations.
Do you provide documentation for insurance or budgeting?
Yes: dated photos, a written condition summary and prioritized recommendations.
How often should a commercial roof be inspected?
Commonly at least annually and after significant storms. Your roof type and building use may call for more frequent checks.
Is a commercial roof inspection free?
DryInside offers free roof inspections. Request one here.
Not Sure What Your Roof Needs?
Schedule a free roof inspection. We'll document what we find and explain your options clearly.
DryInside Roofing and Exteriors is a family-owned residential & commercial roofing contractor licensed in Oregon, Utah and Idaho.
